| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in luksmeta. A local attacker with administrative privileges can cause data corruption when saving metadata to a Linux Unified Key Setup (LUKS) device. Due to incorrect boundary calculations and flawed overlap detection, new metadata entries can be written beyond available free space or over existing records. This issue can corrupt stored encrypted payload data or existing metadata, potentially rendering the affected data inaccessible. |
| Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.8, fromJSON and fromCrossJSON do not validate a sequence node's done index. A crafted done index can create an iterator that never finishes when application code consumes it to completion. An unauthenticated request to a service that deserializes untrusted input can therefore block the event loop, exhaust process memory, or make the service unavailable. This issue is fixed in version 1.6.8. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 0.6.0 until 9.0.0, the AES entry reader in src/aes.rs verifies its HMAC only when the attacker-controlled data counter reaches zero. If the underlying bounded reader reaches the real end of the archive while data_remaining is still positive, or if an encrypted entry has no payload, the reader can return a clean end of stream without reading and comparing the authentication tag. Applications using by_index_decrypt, by_name_decrypt, by_path_decrypt, or password-enabled by_index_with_options can therefore accept modified plaintext without an authentication error. This issue is fixed in version 9.0.0. |
| Improper Validation of Specified Quantity in Input vulnerability in the Elixir standard library's JSON module allows an unauthenticated attacker who supplies a JSON document to cause a denial of service through CPU and memory exhaustion.
JSON.decode/1 and JSON.decode!/1 convert each integer literal with erlang:binary_to_integer/1 and do not bound its length. A literal of one million digits decodes successfully but costs 100 to 300 times as much CPU as a string of the same length, so one request body of a few megabytes holds a scheduler for about a second. A literal of more than about 1.29 million digits raises SystemLimitError. Applications generated by phx.new decode request bodies with JSON in Plug.Parsers, before routing and authentication.
This issue affects elixir: from 1.18.0-rc.0 before 1.18.6, from 1.19.0-rc.0 before 1.19.7, and from 1.20.0-rc.0 before 1.20.5. |
| Improper Validation of Specified Quantity in Input vulnerability in the Elixir standard library's URI module allows an attacker who supplies a URL to cause a denial of service through CPU exhaustion.
URI.parse/1 converts the port component with String.to_integer/1 in split_authority/1 (lib/elixir/lib/uri.ex) without bounding its length, so a port of up to 1,262,592 decimal digits produces a bignum of that size and a longer one raises SystemLimitError. Rendering the parsed URI back to text (URI.to_string/1, inspect/1, logging, error formatting) converts the bignum with :erlang.integer_to_binary/1, which is quadratic on Erlang/OTP 27, 28 and 29.0: a 400,000-digit port renders in about 2.6 seconds and a 1 MB port in about 18 seconds. Ports above 65535 are also accepted.
This issue affects elixir: from 0.5.0 before 1.18.6, from 1.19.0-rc.0 before 1.19.7, and from 1.20.0-rc.0 before 1.20.5. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip disarmed probes when checking optkprobe overlap
On x86, an optkprobe at A replaces five bytes with a jump. If a disabled
probe B is at A+2, get_optimized_kprobe() stops at B when arming a new
probe C at A+4. It leaves A optimized:
A A+1 A+2 A+3 A+4
A's jump | e9 | d0 | d1 | d2 | d3 |
after C | e9 | d0 | d1 | d2 | cc |
The INT3 for C overwrites the last byte of A's jump displacement, so
execution can jump to the wrong address. B can have prepared optinsns
while disarmed, but has no jump to unoptimize.
Continue past disarmed and unprepared probes to find the active optimized
probe before arming a probe in its jump. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: filter some flags received in the backup server
While the IPVS SYNC protocol is not secure by design
we can still protect the backup server from messages that
can wreak havoc.
This commit addresses problems from received connection flags
or their combinations. We now drop messages as follows:
1. the NO_CPORT+TEMPLATE combination allows lookups for normal
connections to hit template which can break in many ways.
While the master does not sync connections with NO_CPORT flag,
i.e. before they are established, we still accept NO_CPORT
without TEMPLATE.
2. ONE_PACKET: it is not sent by master, so we do not
expect it in backup. Before now it was ignored by
IP_VS_CONN_F_BACKUP_MASK for protocol v1 while protocol
v0 created connections that are not hashed and dropped
immediately. Better to apply the IP_VS_CONN_F_BACKUP_MASK
also to the flags from v0 messages for consistency with v1. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems
When system_supports_sme() is true but system_supports_sve() is false,
restoring a specifically crafted SVE signal context can result in the
task erroneously having non-streaming SVE state. Subsequent attempts to
manipulate the task's FPSIMD/SVE/SME state can result in a variety of
problems, including fatal EL1 UNDEFs.
In such configurations, the kernel always creates an SVE signal context
when delivering a signal, and this can only be in one of two states:
(1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing
streaming mode SVE state. The recorded VL is the task's live
streaming VL.
(2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The
FPSIMD context contains the non-streaming mode FPSIMD state. The
recorded VL is 0.
Currently restore_sve_fpsimd_context() correctly rejects cases where
SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to
reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is
present. Consequently, restore_sve_fpsimd_context() can place the task
in a state where it has non-streaming SVE state even when this is not
supported by HW.
For example, this can cause a later EL1 UNDEF when the kernel attempts to
restore the task's ZCR_EL1 value:
| # ./sme-sigcontext-to-sve
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
| Modules linked in:
| CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT
| Hardware name: linux,dummy-virt (DT)
| pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : fpsimd_restore_current_state+0x258/0x458
| lr : exit_to_user_mode_loop+0xb8/0x188
| sp : ffff80008056be40
| x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040
| x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000
| x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0
| x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300
| x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401
| x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002
| x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001
| x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000
| Call trace:
| fpsimd_restore_current_state+0x258/0x458 (P)
| exit_to_user_mode_loop+0xb8/0x188
| el0_svc+0x1cc/0x1d0
| el0t_64_sync_handler+0xa0/0xe4
| el0t_64_sync+0x198/0x19c
| Code: d5384101 f9400020 53175c03 36b80de0 (d5381202)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt
| Kernel Offset: 0x291fb1000000 from 0xffff800080000000
| PHYS_OFFSET: 0x40000000
| CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f
| Memory Limit: none
Rework restore_sve_fpsimd_context() to reject cases where
SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As
parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME
are supported, it isn't necessary for restore_sve_fpsimd_context() to
handle the case where neither are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit efc9dd5590894109bce9a0bfe1fa5592dd6b20b1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring
JPEG rings do not support 64-bit user fence writes, reject CS
submissions with user fences.
(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix inline data read failure for ztailpacking pclusters
Compressed folios for ztailpacking pclusters must be valid before adding
these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()
may assume they are already valid and then trigger a NULL pointer
dereference.
It is somewhat hard to reproduce because the inline data is in the same
block as the tail of the compressed indexes, which are usually read just
before. However, it may still happen if a fatal signal arrives while
read_mapping_folio() is running, as shown below:
erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : z_erofs_decompress_queue+0x4c8/0xa14
lr : z_erofs_decompress_queue+0x160/0xa14
sp : ffffffc08b3eb3a0
x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000
x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001
x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700
x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098
x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004
x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9
x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
z_erofs_decompress_queue+0x4c8/0xa14
z_erofs_runqueue+0x908/0x97c
z_erofs_read_folio+0x128/0x228
filemap_read_folio+0x68/0x128
filemap_get_pages+0x44c/0x8b4
filemap_read+0x12c/0x5b8
generic_file_read_iter+0x4c/0x15c
do_iter_readv_writev+0x188/0x1e0
vfs_iter_read+0xac/0x1a4
backing_file_read_iter+0x170/0x34c
ovl_read_iter+0xf0/0x140
vfs_read+0x28c/0x344
ksys_read+0x80/0xf0
__arm64_sys_read+0x24/0x34
invoke_syscall+0x60/0x114
el0_svc_common+0x88/0xe4
do_el0_svc+0x24/0x30
el0_svc+0x40/0xa8
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1bc/0x1c0
Fix this by reading the inline data before allocating and adding
the pclusters to the I/O chains. |
