| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) 9.3(3) and 9.6(2) could allow an unauthenticated, remote attacker to determine valid usernames. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to the interaction between Lightweight Directory Access Protocol (LDAP) and SSL Connection Profile when they are configured together. An attacker could exploit the vulnerability by performing a username enumeration attack to the IP address of the device. An exploit could allow the attacker to determine valid usernames. Cisco Bug IDs: CSCvd47888. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.5(1) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvd82064. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| Cisco Adaptive Security Appliance (ASA) software 7.2 and 8.2 before 8.2(5.58), 8.3 and 8.4 before 8.4(7.29), 8.5 through 8.7 before 8.7(1.17), 9.0 before 9.0(4.37), 9.1 before 9.1(6.4), 9.2 before 9.2(4), 9.3 before 9.3(3.1), and 9.4 before 9.4(1.1) allows remote attackers to cause a denial of service (device reload) via a crafted DNS response, aka Bug ID CSCut03495. |
| The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209. |
| The DHCP Relay implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4.7.29 and 9.1.7.4 allows remote attackers to cause a denial of service (interface wedge) via a crafted rate of DHCP packet transmission, aka Bug ID CSCuy66942. |
| A vulnerability in the local Certificate Authority (CA) feature of Cisco ASA Software before 9.6(1.5) could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper handling of crafted packets during the enrollment operation. An attacker could exploit this vulnerability by sending a crafted enrollment request to the affected system. An exploit could allow the attacker to cause the reload of the affected system. Note: Only HTTPS packets directed to the Cisco ASA interface, where the local CA is allowing user enrollment, can be used to trigger this vulnerability. This vulnerability affects systems configured in routed firewall mode and in single or multiple context mode. |
| A vulnerability in the HTTP web-based management interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to inject arbitrary XML commands on the affected system. More Information: CSCva38556. Known Affected Releases: 9.1(6.10). Known Fixed Releases: 100.11(0.75) 100.15(0.137) 100.8(40.129) 96.2(0.95) 97.1(0.55) 97.1(12.7) 97.1(6.30). |
| The DCERPC Inspection implementation in Cisco Adaptive Security Appliance (ASA) Software 9.4.1 through 9.5.1 allows remote authenticated users to bypass an intended DCERPC-only ACL by sending arbitrary network traffic, aka Bug ID CSCuu67782. |
| The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223. |
| Cisco Adaptive Security Appliance (ASA) Software 9.3(2.243) and 100.13(0.21) allows remote attackers to cause a denial of service (device reload) by sending crafted OSPFv2 packets on the local network, aka Bug ID CSCus84220. |
| Cross-site scripting (XSS) vulnerability in the WebVPN Portal Login page in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to inject arbitrary web script or HTML via crafted attributes in a cookie, aka Bug ID CSCuh24695. |
| The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 9.2(.2.4) and earlier does not properly manage session information during creation of a SharePoint handler, which allows remote authenticated users to overwrite arbitrary RAMFS cache files or inject Lua programs, and consequently cause a denial of service (portal outage or system reload), via crafted HTTP requests, aka Bug ID CSCup54208. |
| The Clientless SSL VPN portal customization framework in Cisco ASA Software 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.14), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), and 9.2 before 9.2(2.4) does not properly implement authentication, which allows remote attackers to modify RAMFS customization objects via unspecified vectors, as demonstrated by inserting XSS sequences or capturing credentials, aka Bug ID CSCup36829. |
| Cisco Adaptive Security Appliance (ASA) Software 8.2 through 9.4.3.3 allows remote attackers to bypass intended ICMP Echo Reply ACLs via vectors related to subtypes. |
| Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576. |
| The DHCPv6 relay implementation in Cisco Adaptive Security Appliance (ASA) Software 9.4.1 allows remote attackers to cause a denial of service (device reload) via crafted DHCPv6 packets, aka Bug ID CSCus23248. |
