| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The certificate and private key used for providing transport layer security for connections to the web interface (TCP port 443) is hard-coded in the firmware and are shipped with the update files. An attacker can use the private key to perform man-in-the-middle attacks against users of the admin interface. The files are located in /etc/ssl (e.g. salia.local.crt, salia.local.key and salia.local.pem). There is no option to upload/configure custom TLS certificates. |
| VyOS 1.3 through 1.5 (fixed in 1.4.2) or any Debian-based system using dropbear in combination with live-build has the same Dropbear private host keys across different installations. Thus, an attacker can conduct active man-in-the-middle attacks against SSH connections if Dropbear is enabled as the SSH daemon. I n VyOS, this is not the default configuration for the system SSH daemon, but is for the console service. To mitigate this, one can run "rm -f /etc/dropbear/*key*" and/or "rm -f /etc/dropbear-initramfs/*key*" and then dropbearkey -t rsa -s 4096 -f /etc/dropbear_rsa_host_key and reload the service or reboot the system before using Dropbear as the SSH daemon (this clears out all keys mistakenly built into the release image) or update to the latest version of VyOS 1.4 or 1.5. Note that this vulnerability is not unique to VyOS and may appear in any Debian-based Linux distribution that uses Dropbear in combination with live-build, which has a safeguard against this behavior in OpenSSH but no equivalent one for Dropbear. |
| "FOD" App uses hard-coded cryptographic keys, which may allow a local unauthenticated attacker to retrieve the cryptographic keys. |
| Arcade MCP allows you to to create, deploy, and share MCP Servers. Prior to 1.5.4, the arcade-mcp HTTP server uses a hardcoded default worker secret ("dev") that is never validated or overridden during normal server startup. As a result, any unauthenticated attacker who knows this default key can forge valid JWTs and fully bypass the FastAPI authentication layer. This grants remote access to all worker endpoints—including tool enumeration and tool invocation—without credentials. This vulnerability is fixed in 1.5.4. |
| A private key disclosure vulnerability exists in ZTE's ZXMP M721 product. A low-privileged user can bypass authorization checks to view the device's communication private key, resulting in key exposure and impacting communication security. |
| A low privileged local attacker can abuse the affected service by using a hardcoded cryptographic key. |
| NeuVector used a hard-coded cryptographic key embedded in the source
code. At compilation time, the key value was replaced with the secret
key value and used to encrypt sensitive configurations when NeuVector
stores the data. |
| A vulnerability was detected in nocobase up to 1.9.4/2.0.0-alpha.37. The affected element is an unknown function of the file nocobase\packages\core\auth\src\base\jwt-service.ts of the component JWT Service. The manipulation of the argument API_KEY results in use of hard-coded cryptographic key
. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The use of a hard-coded cryptographic key was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software contains a hard-coded AES key used to protect the initial messages of a new KOPS session. |
| A vulnerability was identified in coze-studio up to 0.2.4. The impacted element is an unknown function of the file backend/domain/plugin/encrypt/aes.go. The manipulation of the argument AuthSecretKey/StateSecretKey/OAuthTokenSecretKey leads to use of hard-coded cryptographic key
. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is regarded as difficult. To fix this issue, it is recommended to deploy a patch. The vendor replied to the GitHub issue (translated from simplified Chinese): "For scenarios requiring encryption, we will implement user-defined key management through configuration and optimize the use of encryption tools, such as random salt." |
| Use of hard-coded cryptographic key vulnerability in i-PRO Configuration Tool affects the network system for i-PRO Co., Ltd. surveillance cameras and recorders. This vulnerability allows a local authenticated attacker to use the authentication information from the last connected surveillance cameras and recorders. |
| SmartOS, as used in Triton Data Center and other products, has static host SSH keys in the 60f76fd2-143f-4f57-819b-1ae32684e81b image (a Debian 12 LX zone image from 2024-07-26). |
| The Use of a Hard-coded Cryptographic Key vulnerability in Juniper Networks Juniper Cloud Native Router (JCNR) and containerized routing Protocol Deamon (cRPD) products allows an attacker to perform Person-in-the-Middle (PitM) attacks which results in complete compromise of the container.
Due to hardcoded SSH host keys being present on the container, a PitM attacker can intercept SSH traffic without being detected.
This issue affects Juniper Networks JCNR:
* All versions before 23.4.
This issue affects Juniper Networks cRPD:
* All versions before 23.4R1. |
| Successful exploitation of this vulnerability could allow an attacker (who needs to have Admin access privileges) to read hardcoded AES passphrase, which may be used for decryption of certain data within backup files of 2N Access Commander version 1.14 and older.
2N has released an updated version 3.3 of 2N Access Commander, where this vulnerability is mitigated. It is recommended that all customers update 2N Access Commander to the latest version. |
| A vulnerability was detected in PandaXGO PandaX up to fb8ff40f7ce5dfebdf66306c6d85625061faf7e5. This affects an unknown function of the file config.yml of the component JWT Secret Handler. The manipulation of the argument key results in use of hard-coded cryptographic key
. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| itech iLabClient 3.7.1 relies on the hard-coded YngAYdgAE/kKZYu2F2wm6w== key (found in iLabClient.jar) for local users to read or write to the database. |
| Keysight Ixia Vision has an issue with hardcoded cryptographic material
which may allow an attacker to intercept or decrypt payloads sent to the
device via API calls or user authentication if the end user does not
replace the TLS certificate that shipped with the device. Remediation is
available in Version 6.9.1, released on September 23, 2025. |
| Arris VIP1113 devices through 2025-05-30 with KreaTV SDK have a firmware decryption key of cd1c2d78f2cba1f73ca7e697b4a485f49a8a7d0c8b0fdc9f51ced50f2530668a. |
| A vulnerability has been found in MartialBE one-hub up to 0.14.27. This vulnerability affects unknown code of the file docker-compose.yml. The manipulation of the argument SESSION_SECRET leads to use of hard-coded cryptographic key
. The attack may be initiated remotely. The complexity of an attack is rather high. It is stated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. It is recommended to change the configuration settings. The code maintainer recommends (translated from Chinese): "The default docker-compose example file is not recommended for production use. If you intend to use it in production, please carefully check and modify every configuration and environment variable yourself!" |
| Dpanel is a Docker visualization panel system which provides complete Docker management functions. The Dpanel service contains a hardcoded JWT secret in its default configuration, allowing attackers to generate valid JWT tokens and compromise the host machine. This security flaw allows attackers to analyze the source code, discover the embedded secret, and craft legitimate JWT tokens. By forging these tokens, an attacker can successfully bypass authentication mechanisms, impersonate privileged users, and gain unauthorized administrative access. Consequently, this enables full control over the host machine, potentially leading to severe consequences such as sensitive data exposure, unauthorized command execution, privilege escalation, or further lateral movement within the network environment. This issue is patched in version 1.6.1. A workaround for this vulnerability involves replacing the hardcoded secret with a securely generated value and load it from secure configuration storage. |
