| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: treat TCP_CLOSING as once-established
Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can
race with the connect loop. Immediately break and return 0 on
ESTABLISHED/CLOSING. The return value of connect() should reflect what
happened up to the point the connection was established or failed. Events
that occur afterwards must not affect it. E.g. even if OP_RW has already
set sk_err, connect() should still return 0, not ENOBUFS because of it.
Adapt the inaccurate comment above signal_pending().
Resetting a socket that is still present in connected_table can lead to
memory corruption. The reporter noted lost transports for in-flight skbs,
and I have reproduced crashes caused by re-insertion into connected_table.
list_add double add: new=, prev=, next=.
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:__list_add_valid_or_report+0x11f/0x130
Call Trace:
vsock_insert_connected.cold+0xe/0x13
virtio_transport_recv_pkt+0x10e9/0x1460
vsock_loopback_work+0x305/0x480
process_one_work+0xe4c/0x1560
worker_thread+0x4f1/0xd60
kthread+0x36e/0x470
ret_from_fork+0x47b/0x6b0
ret_from_fork_asm+0x1a/0x30
This fix is supplementary to commit 002541ef650b ("vsock: Ignore
signal/timeout on connect() if already established"). Details under Link. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: fix a tiny race condition in crypt_dec_pending
crypt_dec_pending reads io->error before calling atomic_dec_and_test.
Another context, for example crypt_endio called from an interrupt, may
set io->error and drop its reference between the read and the
decrement. crypt_dec_pending then drops the last reference and completes
the bio with the stale status - so a read that failed and was never
decrypted, or a write that failed, is reported as successful.
The read was placed before the decrement by commit b35f8caa0890 ("dm
crypt: wait for endio to complete before destruction"), because that
commit freed dm_crypt_io before calling bio_endio. This is no longer the
case, dm_crypt_io lives in the per-bio data now.
Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is
fully ordered, so no additional barrier is needed. |
| WordPress Core is vulnerable to Remote Code Execution in versions 4.7 through 7.1.3. This is due to predictable, web-accessible staging paths used during full-package core upgrades. This makes it possible for unauthenticated attackers to execute code on the server during the upgrade window. |
| A flaw has been found in HaschekSolutions PictShare up to 3.7.1. The impacted element is the function architect of the file src/inc/core.php of the component File Upload. This manipulation causes race condition. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit has been published and may be used. Upgrading to version 3.7.2 is sufficient to resolve this issue. Patch name: 6306e33da630c04ddff60703922c2ec7b7539452. It is advisable to upgrade the affected component. The vendor was contacted early about this disclosure. |
| MacCMS v10 through 2026.1000.4056 contains a race condition vulnerability in Card::useData() that allows authenticated members to redeem one recharge card multiple times via the user/buy endpoint. Attackers can send many concurrent flag=card requests that pass the non-locking card read before it is marked used, inflating user_points to buy VIP upgrades and paid content. |
| VoiceSentinel is a real-time voice moderation system for Minecraft servers. From 2.2.1 until 3.3.1, the optional report buffer feature has a race between retention cleanup and normal transcript writes. In `report_buffer.py`, `_maybe_cleanup()` uses an unlocked dictionary for once-per-hour cleanup throttling, allowing simultaneous `_cleanup_tenant()` operations for one tenant. Cleanup reads `transcripts.jsonl` and rewrites it in place without file locking or atomic replacement, while `report_buffer_append_async` uses `asyncio.to_thread` to append without synchronization. In `main.py`, concurrent `_processing_worker` tasks make this reachable in normal operation; `processing.worker_count` of two or more and public-pool servers sharing a `server_key` increase collisions. With `report_buffer.enabled` set to true, racing writes can lose, duplicate or corrupt transcript data and defeat `report_buffer.retention_seconds` pruning, allowing unbounded disk growth that can exhaust storage and crash the host or other services sharing it. The feature is opt-in and disabled by default. This issue is fixed in version 3.3.1. |
| In server mode pgAdmin 4 validates a path into the user's storage directory with check_access_permission(), which builds the absolute path with get_abs_path(). Several callers then acted on a path they built differently, so the path checked and the path used could name different files:
- Opening a file in the Query Tool, the Google client secret and, on Windows, Import/Export Data, Backup, Restore and saving a file joined the path to the storage directory after stripping leading slashes and backslashes. On POSIX a path checked as a name inside storage could become an absolute path once stripped, so any file the pgAdmin account can read could be opened; on Windows a path naming a drive discarded the storage directory, so these could read, or write, outside it.
- Listing a folder decoded the path a second time after the check, so a folder named like an encoded "..", which a user can create, listed any directory on the host.
- Download, delete, rename and the file-exists check appended the path to the storage directory without a separator, so in a deployment where one user's storage directory name is a prefix of another's, another user's files could be read, deleted or moved; download also checked the path appended to itself.
- Creating a folder could create one in another user's directory.
The fix makes check_access_permission() return the path it checked and every caller act on that path, decodes folder paths once, and opens, deletes and renames files relative to directories opened from the storage directory without following symbolic links. Desktop mode is not affected.
This issue affects pgAdmin 4: before 9.19. |
| In server mode pgAdmin 4 validates a path a user gives for a file in their storage directory with check_access_permission() and then opened it by name. Several places opened it with a plain open() or handed the path to a utility that opened it later: the servers.json export and import and the import file listing, and the files given to pg_dump, pg_dumpall, pg_restore and psql by Backup, Restore and Import/Export Data. A symbolic link swapped in at the file or at any parent directory between the check and the open redirected the operation outside the storage directory, so a file could be written, overwritten or read, or loaded into a table, as the operating-system account running pgAdmin. A hard link to an outside file, which O_NOFOLLOW does not detect, and a FIFO, which could hang a request, had the same effect. CVE-2026-86861 fixed this for the File Manager's save_file; these were the remaining paths.
Exploitation requires creating such a link or FIFO inside the user's storage directory. pgAdmin offers no way to do so, and the per-user storage directories belong to the pgAdmin account, so this requires write access to the storage backend as a different operating-system user, for example a shared or network-mounted storage directory, and winning the race.
The fix opens each file by walking down from the storage directory one component at a time with O_NOFOLLOW, accepting only a regular file with one link, and passes the utilities the open descriptor (/dev/fd/N) on Linux. Error messages no longer include the server path.
This issue affects pgAdmin 4: before 9.19. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| A flaw was found in the `puppetlabs-cinder` module, as used in PackStack. This vulnerability is due to incorrect file permissions, specifically world-readable permissions, on the `cinder.conf` and `api-paste.ini` configuration files. A local user can exploit this by reading these files, which leads to the disclosure of OpenStack administrative passwords. This information disclosure could allow unauthorized access to sensitive OpenStack resources. |
| A flaw was found in the HOTP authentication mechanism of the keycloak-services component, which provides identity and access management services. The issue occurs because the system validates a one-time password and updates its internal counter in two separate steps without proper locking. An attacker with a users password could exploit this timing gap to use a single one-time code to log in multiple times simultaneously. |
| Uptime Kuma through 2.5.8 contains a race condition in the Socket.IO first-run setup handler that allows unauthenticated attackers to create an additional administrator account. Attackers can send concurrent setup requests during the bcrypt hashing window to bypass the empty user table check, then modify monitors, API keys, and enable disableAuth. |
| A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime.
Root Cause:
When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact).
Affected Scenarios:
Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3505 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: usb: fix race between urb completion and rx_retry cancellation
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb. |
| A race condition in Epiphany allows a malicious website to bypass the TLS/SSL certificate warning page.
Epiphany registers the main-world script message handler "tlsErrorPage" so its internal TLS error page can implement "Accept Risk and Proceed". The handler was registered immediately before loading the error page, leaving a brief window where the previously loaded untrusted origin could still call window.webkit.messageHandlers.tlsErrorPage.postMessage(...). The only authorization check compares a numeric WebKit page id that increments predictably; an attacker can burst-guess ids and approve a certificate exception with no user click.
If a victim visits malicious site A that redirects to site B with an invalid certificate, site A can, for a few milliseconds, disable TLS certificate error warnings for host B until Epiphany is restarted, enabling man-in-the-middle or site spoofing for that host.
Upstream report: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2978
Proof of concept: https://beford.net/poc/ssl_poc.html
Fix: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2245 (register handlers on LOAD_COMMITTED). No fixed release tagged yet; reporter and maintainer describe all current versions as affected. Maintainer notes the risky registration timing dates to commit 1da1caed (Epiphany 45.x era); before that the handlers were always registered and similarly reachable from web content. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: fix division by zero in write_raw
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16260: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero to the sampling_frequency sysfs
attribute triggers a division by zero in the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: nxp-sar-adc: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value. |
